NetWave DirectView Broadcast Console Operations & Technical Manual
Revision A
1 - Introduction
Harris Broadcast
1-10
PR&E
Stereo Separation
Between Analog Program Outputs: >90 dB, 20 Hz to 20 kHz
Crosstalk Isolation
Program-to-Program bus: 85 dB, 20 Hz to 20 kHz
Frequency Response
Input to Program Output: +0.3 dB/-0.1 dB, from 20 Hz to 20 kHz
Dynamic Range
Analog Input to Analog Output: 106 dB referenced to FSD, 108 dB “A” weighted to FSD
Analog Input to Digital Output: 108 dB referenced to FSD, 110 dB “A” weighted to FSD
Digital Input to Analog Output: 108 dB referenced to FSD, 111 dB “A” weighted to FSD
Digital Input to Digital Output: 115 dB
Total Harmonic Dist Noise
Analog Input to Analog Output: <0.003%, 20 Hz to 20 kHz (<0.002% typical at 1k), +18 dBu input, +18
dBu output
Analog Input to Digital Output: <0.0009%, 20 Hz to 20 kHz, +18 dBu input, -6 dB FSD output
Digital Input to Analog Output: <0.003%, 20 Hz to 20 kHz (<0.002%, typical at 1 kHz), -6 dB FSD input,
+18 dBu output
Digital Input to Digital Output: <0.0005%, 20 Hz to 20 kHz, -6 dB FSD input, -6 dB FSD output
Analog Line Inputs
Input Impedance: >60k Ω, balanced
Nominal Input Level: +4 dBu (each input can be independently trimmed by +/-15dB)
Input Headroom: 20 dB above nominal input
Analog Line Outputs
Output Source Impedance: <3 Ω, active balanced
Output Load Impedance: 1k Ω min.
Nominal Output Level: +4 dBu
Maximum Output Level: +24 dBu
CR & Studio Monitor Outputs
Output Source Impedance: <3 Ω, active balanced
Output Load Impedance: 1k Ω minimum
Nominal Output Level: +4 dBu
