![Harpo Mountbatten Brailler Tutor User Manual Download Page 63](http://html1.mh-extra.com/html/harpo/mountbatten-brailler-tutor/mountbatten-brailler-tutor_user-manual_3979114063.webp)
Connecting to the Internet
To connect to the Internet, you may use the Wi-Fi hub at your place of work or study. You
will need the advanced Mountbatten Brailler Tutor functions available (to enable those
functions, it may take a few minutes after you switch the unit on). After you hear the
"Advanced Mountbatten Brailler Tutor functions available now" message, you may go to
the System menu and choose Wi-Fi settings. You should see a list of available Wi-Fi
networks. If the one you want to connect to is not listed - you may refresh (the first option
on the list).
After you find your network choose it with the Enter key, you will be prompted for a
password. There is an additional switch under the network list to show or hide a password
while it is entered.
The connection should be established immediately after you give the correct password.
MB Tutor and Duxbury Translator
MB Tutor connects to PC with Duxbury Translator installed over a USB cable. While
connecting, remember to set the hardware parameter "Flow Control" to "None". All other
settings should stay default.
Please check the Duxbury User Manual for more information on printing braille texts from
a PC with Duxbury Translator to Mountbatten Brailler Tutor.
Mountbatten Brailler Tutor User Manual v. 1.0.3
Page 62