Harmopool Harmo PAC Series, Instruction Manual

Page: 13 / 19

13
Functions of the display
o
Under standby status, press M button 5s to enter Operation Parameter setting interface;" "
o
Press
＂
M
＂
again to start setting (parameter from 00-D,see the Operation Parameter Table);
o
Under parameter setting, press to set data;
o
Please note no motion on the display for 10s,the LCD will display water-in/water out
temp.(under running)or ambient temp.(under standby status)
o
Under running status, you can press M" ”5s to check current parameter, but you cannot
change the data of the parameter!
o
Remarks: Standby status means the unit is connected with electricity but not running.
or