Page
17
of
28
To lower press and hold the Down Height Adjustment Button on the handset.
Caution:
Before adjusting the height of the bed ensure there is nothing to obstruct
the movement of the bed and ensure that no cables will become pinched or be
over stretched.
9.5 Auto-contour
adjustment
Auto-contour adjustment allows for the simultaneous adjustment of both the backrest and knee-
break sections.
To raise the backrest and knee-break sections of the bed, press and hold the Up
Auto-Contour Adjustment Button on the handset to reach the desired position.
To lower the backrest and knee-break sections of the bed, press and hold the Down
Auto-Contour Adjustment Button on the handset to reach the desired position.
9.6 Trendelenburg and Reverse Trendelenburg (on fitted models)
To tilt the mattress platform into the head down tilt (Trendelenburg) press and hold
the Trendelenburg Adjustment Button.
To tilt the mattress platform into the foot down tilt (Reverse Trendelenburg) press
and hold the Reverse Trendelenburg Adjustment Button.
Caution
:
B
efore carrying out these operations, check there are no objects on or under
the lower frame which could interfere with the bed movement. These functions can be
locked out by means of the magnetic key fob on the handset.
10. Moving the Bed
Before moving the bed, ensure that a risk assessment is completed.
To move the bed:
•
Release all 4 castor brakes, these are foot only operated.
•
Move the bed to the desired location.
•
Taking care not to run any cables over.
•
Re-apply the castor brakes.
•
Check there are no obstructions near the bed.
•
Check the cabling is not pinched or kinked anywhere.
•
Re-connect the bed to the mains supply.
Caution:
Ensure there is no risk of injury to any person involved in moving the bed and
ensure there is no risk of damage to the bed.
