15
Wireless pairing
operation
Make sure the Control Box is properly connected to the Motor.
Click the pairing button TWICE until the LED turns on. Now you have
60
seconds for pairing process.
Press and
hold simultaneously
and
buttons on the Remote (A) until its
LED Flashing & System response with beep.
Please repeat all the above steps if the pairing operation failed.
*
If
the Radio Frequency(RF) of
handset is interfered by others electronics nearby, re-plug the electrical power will
help changing into a new RF and operate again.
P.S. Led Floor Light will turn on & enter in RF pairing mode when
1.
Double Click Pairing Button
2.
Plug CU155 into motor after long time lost electrical power
If the handset is already paired , under re-plug electrical power, even though LED Floor Light is on, it will
turn off when pressing handset.
Synchronization of two bases_ Wireless Pairing (Option)
After completion of the pairing the 1
st
system, click the pairing button TWICE on the control box of the 2
nd
system.
Press and hold simultaneously
and
buttons on the Remote of the 1
st
system until its LED glows
continuously. Now the Remote of the 1
st
system allows the parallel operation.
Important Notes:
For pairing the distance
between the Remote (A)
and the Control Box
should be less than 2
meters.
22
Summary of Contents for Hi Lo Tilt HS
