Harmony Hi Lo Tilt HS, Assembly And Operation Manual

Page: 13 / 28

11
STEP 9
Insert three AAA Batteries (D) into the compartment of the Remote Control (A).
STEP 10
Take out 8*Support Legs(E) from the accessories box.
You have adjustable height choices and can use any of or three all leg height choices of 5 ", 2-1/2",2".
Once the height is determined, securely tighten the legs onto your Adjustable Base and leave no gap
between leg and base.
STEP 11
Carefully flip over your topside
-
down Adjustable Base. Lift up the Base to desired location.
IMPORTANT NOTE:
Be Careful when flipping your Base:
The installed legs could get damaged or bent by excessive pressure, if you lean your
Adjustable Base on the legs.
1. Do not recline the Base against the installed legs to flip it over.
2. Do not drag the Base across the floor.
STEP 12
Plug the AC Main Cable (C) in an electrical outlet with 100-240V, 50/60 Hz. A surge protector (not
included) is recommended for longer life of your Adjustable Base.