Harmony Folding Adjustable Base, Assembly And Operation Manual

Page: 9 / 32

STEP 4
STEP 5
Insert two AAA Batteries (D) into the compartment of the Remote Control (A).
STEP 6
7
STEP 7
Carefully flip over your topside-down Adjustable Base. Lift up the Base to desired location.
Find Extension Cable from the Head Section of your Adjustable Base and plug it into SMPS (B).
Take out AC Main Cable (C) from accessories box and plug it into SMPS (B).
IMPORTANT NOTE:
Be Careful when flipping your Base:
The installed legs could get damaged or bent by excessive pressure, if you lean your
Adjustable Base on the legs.
1. Do not recline the Base against the installed legs to flip it over.
2. Do not drag the Base across the floor.
Take out Support Legs(E) *6 and securely tighten onto your Adjustable Base and leave no gap between
them.
**If you have two or three-sectional legs, you may allow to choose the suitable height for your base.
STEP 8
Plug the AC Main Cable (C) in an electrical outlet with 100-240V, 50/60 Hz. A surge protector (not
included) is recommended for longer life of your Adjustable Base.