Product regulatory compliance
English translation of the notice above: This is a Class A device and is registered for EMC
requirements for industrial use. The seller or buyer should be aware of this. If this was sold or
purchased by mistake, it should be replaced with a residential-use type.
7. Class A statement (China)
English translation of the notice above: When labeled with the CCC marking, the product meets
the applicable safety and EMC requirements for China. This is a Class A product. In a domestic
environment this product may cause radio interference, in which case the user may be required to
take adequate measures.
8. Class A warning – CISPR 22 (AS/NZS)
Warning (English)
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Attention (French)
Il s'agit d'un produit de classe A. Dans un environnement local, ce produit peut
entraîner des perturbations radioélectriques, auquel cas l'utilisateur devra éventuellement prendre
des mesures adéquates.
Product regulatory compliance
Harmonic products are typically tested to the latest safety and electromagnetic compatibility (EMC)
specifications and test methods, and are marked with one or more of the following regulatory/certification
markings. Some of the certification markings will vary depending on what certifier was used to obtain a
certification.
Please visit Harmonic
page to view information on applied
safety & EMC standards and regulatory marks on Harmonic products. You can also email us at
for assistance on regulatory compliance for Harmonic products.
245
Spectrum System 8.4 Installation Guide
