Chapter 5: MediaDirector hardware reference
10 Gb fiber optic port LED states
The optional 10 Gb fiber optic ports I/O module ports can be used for SMPTE 2022-6 video. The LEDs
provide information on link status, activity, and speed.
LED/State
Condition
Link/Activity: green (blink)
Network activity
Link/Activity: green (solid)
Network link established
Link/Activity: off
No link
Speed: green
Network traffic at 10 Gbps
Speed: amber
Network traffic at 1 Gbs
Speed: off
Network traffic at 100 Mbps or no activity
Power supply LED states
Each power supply includes an LED to indicate the status of AC power to the system.
Figure 5-11: Power supply LED
LED state
Condition
Off
AC power is not connected.
Green, solid
A valid AC source is connected to the power supply, and the power
supply is operational.
Green (1 Hz blink)
AC is present, but the power switch on the front panel is off or in a
cold redundant state due to low system power load.
Green (2 Hz blink)
Power supply firmware updating.
Amber, blink
Power supply is operational, but experiencing a warning event.
134
