Chapter 7 Device Configuring Using EMS
Multiplex Inputs
© 2012 Harmonic Inc.
92
ProView 7000 v.2.6, Rev. E
7.2.3
Input Unreferenced PIDs Management
Click the
Unreferenced PIDs
branch in the
Multiplex Input
box to display all the PIDs related to
the multiplex input that are not referred to a specific program or table.
NOTE:
The properties of the input unreferenced PIDs in the multiplexed input stream is detailed in
7.2.9 Input Unreferenced PID Properties
.
7.2.4
Multiplex In Port Properties
Use the Multiplex In Port dialog to display a multiplex in port status, configure a multiplex in
port or configure a port input redundancy.
To display the Multiplex In Port dialog:
1. Select a
Multiplex In Port
icon in the
Multiplex Input
box on the Device Explorer tab.
2. Click
Properties
on the EMS toolbar.