Chapter 6 Remote Management using EMS
Launching EMS
© 2012 Harmonic Inc.
65
ProView 7000 v.2.6, Rev. E
To check the ProView 7000™ EMS Java version:
a
Run
cmd
in Windows.
b
Enter
Java -version
and press
Enter
to check which version is currently on your
station. Update if necessary from the Java Web start page.
2. Click
Launch ProView 7000 EMS
on the ProView 7000™ web page to install the EMS.
The EMS application installs. Shortcuts are added to the desktop
and the start
menu.
6.4 Launching
EMS
Prerequisites:
The device IP address must be configured using the ProView 7000™ front panel, see
6.1 Configuring the IP Parameters
To launch the ProView 7000™ EMS:
❖
Double-click the Harmonic ProView 7000™ EMS launch icon
to launch EMS.
The EMS GUI displays.
6.5
Adding a Device
To add a device:
1. Click
Add Device
on the EMS toolbar
—or—
select
Administration > Add ProView 7000
.
Figure 6–1: Add Device dialog
The EMS displays the Add ProView 7000™ Device dialog.
2. Enter a name for the new ProView 7000™ device.
3. Enter the IP Address of the new ProView 7000™ device.
