Chapter 7 Device Configuring Using EMS
Multiplex & Decoding Outputs
© 2012 Harmonic Inc.
118
ProView 7000 v.2.6, Rev. E
7.3.8.4
Audio 1/2 Parameters Tab
The Audio 1/2 parameters tab provides the EMS user the following information and set-up
capabilities:
General Audio processing parameters:
■
Decoding Codec
– selects the audio decoding mode.
Options:
❑
Automatic
❑
Musicam
❑
Dolby Digital
11
(AC-3)
❑
Dolby Digital (AC-3) Pass Through
❑
Dolby Digital Plus
(E-AC-3) – (Audio 1 channel only)
❑
DD+ (E-AC-3) to DD (AC-3) Pass Through – (Audio 1 channel only)
❑
AAC LC – (Audio 1 channel only)
❑
HE AAC – (Audio 1 channel only)
❑
Dolby E
/ Linear PCM Pass Through – (Audio 2 channel only)
■
Volume
– sets the audio volume.
Range:
−
64 to 0 dB
■
Delay
– the delay.
Range:
−
128 to +128 msec.
■
Analog Mixer
– selects the mixing L/R inputs to outputs.
Options:
❑
Stereo
❑
Mono
❑
Both Left
❑
Both Right
■
Digital Format
– selects the audio format mode.
Options:
❑
Professional
❑
Consumer
11. Dolby, Dolby E, Dolby Digital and Dolby Digital Plus are registered trademarks of Dolby Laboratories.
