Chapter 7 Device Configuring Using EMS
Multiplex & Decoding Outputs
© 2012 Harmonic Inc.
105
ProView 7000 v.2.6, Rev. E
7.3.2
Multiplex Output Properties
The
Multiplex Output Port Properties
dialog displays the current status of the multiplex
output stream features and enables setting up the editable ones.
To display the
Multiplex Output Stream Properties
dialog:
1. Select the
Multiplex Output
icon from the
Multiplex & Decoding Output
box on the Device
Explorer tab.
2. Click
Properties
on the EMS toolbar.
Figure 7–10: Multiplex Out 1 Port - Properties dialog
The information provided by the Multiplex Output Properties dialog includes the following:
■
Enabled
– Enables (Yes/No) the multiplex output operation.
■
Transport Stream ID
– Displays the transport-stream’s ID number.
■
Table Extraction
– Select
PSI/SI
for DVB or
PSI
for MPEG. The default is
PSI/SI
.
■
Configured Bitrate
– Displays the calculated bitrate of the output stream (in bps).
■
Actual Bitrate
– Displays the actual bitrate of the output stream (in bps), not including
NULL stuffing.
Table 7–3: TS Port Output Port Context Menu
Command
Description
Disable/
Enable
A dynamic command, changing according to the operational status of the
TS Output Port.
Remove Selected
Removes the selected element.
Remove All
Displays the following sub-menu items:
■
Remove All Output Programs on Port
■
Remove All Output Programs on Device
■
Remove All Output Unreferenced PIDs on Port
Refresh Transport Stream
Port Route
Updates the Transport Stream Port Route.
Properties
Displays the marked element properties dialog. For details, see
