Removing the PCI riser
Example:
Removing the PCI riser
Instructions on how to remove the PCI riser.
As a preparation to insert the optional card into the PCI riser, the PCI riser needs to be removed from the
device.
1. From the outside of the chassis, press the riser assembly faceplate in and upward until the riser
becomes dislodged.
2. Gently push the tab on the plastic air duct away from the riser assembly, just until you can freely lift
the riser assembly.
3. Grasp the riser assembly with both hands and lift straight up.
ASI and 10G cards
How to install the individual cards.
Installing the ASI panel bracket and card
Instructions on how to install the ASI panel bracket.
1. Remove the DIN lock rings from the ports on the ASI card bracket.
2. Place the ASI panel bracket over the DIN connectors.
NOTE:
Make sure that the ASI panel bracket sits flush against the ASI card bracket.
27
ProStream X 2.4.x Installation Guide
