Chapter 4 Transport Stream Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
100
Ellipse 3000 Release 3.0, Rev. B
M-SPTS Sub-Menu/Tab
4.3.2.1
IP1/IP2 Configuration
The IP1/IP2 Configuration Menu provides access to the IP parameters.
The IP1/IP2 features enabled for managing are:
■
Dst IP
– sets the IP destination address. When there is more than one M-SPTS, the destination
IP address must be a multicast address.
■
Dst Port
– sets the IP destination port number. The range is 01 to 65535.
■
Type of Service
– sets the type of service selected for the stream.
The range is 0 to 0x7f [hexadecimal].
■
TTL
– sets the TTL for the stream. The range is 0 to 256.
Front Panel
To set the Ellipse encoder IP parameters on the front panel:
❖
Navigate
Root > Configuration > Transport Stream > M-SPTS > Transports List > [MPTS Name]
> IP1/IP2
.
Web Manager
To access the IP1/IP2 setup menu in the Web Manager:
❖
Select
Transport > M-SPTS > [Stream Name]
and go to the IP1/IP2 area.
IP1
1 Dst IP
224.251.251.001
2 Dst Port
2000
3 Type of Service
0x0
4 TTL
128
