Harmonic ELECTRA VS, User Manual

Page: 121 / 604

Chapter 3 ’Web User Graphical Interface’ — Operating Instructions (Tutorial)
Electra VS - Version 05.10 121
User Manual - Rev. A
Creating an MPTS Job with Statmux
To create a job that uses statistical multiplexing, proceed as follows:
1. Create one Live SD-HD Transcoder job for each program of the MPTS
you wish to create. The procedure is the same as previously, except
that you must set the
Rate mode to Statmux and set the Minimum
bitrate , Maximum bitrate and Quality parameters in the Video
category ( Output TS type must be set to MPTS in the Global
parameters category).
Figure 3-58. UM_TV1VBR job parameter - Video (Statmux)
In our example, we choose the following names: UM_TV1VBR for the 1st
program, UM_TV2VBR for the 2nd program,... and UM_MPTS_VBR for
the MPTS.