Harmar Mobility Helix Series, Owner'S Manual

Page: 5 / 16

Helix Curved Stair Lift: Owner’s Manual
26JUNE19 | 610-00039-01 REV C
5
HELIX CURVED STAIR LIFT
OPERATIONS
POWER SUPPLY
The stair lift should be kept fully charged at all
times. When the lift stops at an upper or lower
landing it will charge automatically. The charger
should be left plugged in at all times and the lift
may be left on charge indefinitely. A green light
indicates the supply is on.
REMOTE CONTROL
Your Remote Control allows you to move your
Stair Lift from its parked position. Just press the
up or down button for the desired direction.
Keep the button pressed until the lift reaches its
final position and stops automatically.
MID LEVEL PARKING
When the unit comes in contact with the mid-
level charger, it will stop for about 3 - 5 seconds.
If you release the remote or toggle it will charge
at that location.
OPERATION
1.
Fold down the armrests and seat before
using the lift.
2. Tighten seat belt.
3. Start the run by using the rocker button
on your arm rest, push the rocker button
in the direction you want to ride and
maintain pressure until the lift reaches its
final position and stops automatically.
4.
Use the seat swivel handle to turn the
seat to dismount after it has reached the
final stop (top position). It is now possible
to fold up the foot support, seat, and
armrests to save space.
Controls
Emergency Safety
(Optional)
Key Lock (Optional)
Power Switch (Circuit
Breaker)
Status Light
- Red = Major Fault
- Yellow =
Obstruction
- Green = Ready
Power On Light
Charging Light
Test/Diagnostic Port
This port enables
you to connect a PC
to the unit to check
several functions.
Before using the remote, always check that
no one is in the process of getting on/off. The
remote can move the unit when it is not in
sight.
WARNING
!
Always use the seat belt when using your lift.
WARNING
!
NOTE: When the Stair Lift stops in the parked
position, ensure that the charger light is lit.
It indicates the lift has stopped in the correct
charging position.
NOTE: A seat swivel locking device on the seat
prevents the lift from being operated unless the
seat is in its operating position.