HELIX:
Install Manual
24SEP2021 | 630-00063-01 REV D
16
INSTALLATION
HELIX CURVED STAIR LIFT: SECTION 3
WIRELESS REMOTE
REPROGRAMMING
The wireless controllers are shipped pre-
programmed for the seat.
Note: The remote board will beep once and the chassis
board will beep once.
If the remotes need to be re-programmed or you
have a replacement remote, do the following:
1.
On the wireless control board, press and hold
the small black button that says "pair". At the
same time, hold the up button on remotes for
three (3) seconds. This will link the board and
the remotes to your lift.
See Figures 3-46 and 3-47.
Figure 3-46
Power light
Receiving signal
light
Reset button
Pair button
Green light indicates
up or down
Figure 3-47
Summary of Contents for csl500
