Harmar Mobility csl500, Installation & Service Manual

Page: 14 / 24

HELIX:
Install Manual
24SEP2021 | 630-00063-01 REV D
14
INSTALLATION
HELIX CURVED STAIR LIFT: SECTION 3
ALIGNMENT
Align charging stations. Pay attention to the
charging contacts, where the drive unit meets the
station. They should apply pressure to the charging
strips on the chassis. Adjust as needed.
1. The spring loaded contacts should compress
about 1/4". See Figure 3-34.
Figure 3-34
2. Route the red and black wires through the hole
provided in the rail by the charging station. Use
provided grommet to protect the wire.
3.
Determine which end has the AC power for the
power supply. Connect the power supply with
the provided connector, which has a red and
black wire, to the red and black wires. Using the
provided terminals, attach the charge wire to
the wires in the rail. See Figure 3-35.
Battery
Charger
White + Red +
Black Black -
+
-
+
-
Figure 3-35
4. Attach to the charge station and install cover.
See Figures 3-36 through 3-39.
Figure 3-36
Figure 3-37
Figure 3-38
Figure 3-39