Outside Vehicle Lifts:
Installation & Service Manual
06DEC19 | P/N: 630-00106 REV A
24
OUTSIDE VEHICLE LIFTS:
SECTION 6
LIFT ADJUSTMENTS
AL560 & AL580 - HOLD-DOWN
ARM ADJUSTMENT
1.
Position the chair onto the platform after the
cradles have been adjusted. See Figure 6-10.
Figure 6-10
2.
Raise the platform to top of travel until you hear
the motor clutch. See Figure 6-11.
Figure 6-11
3.
Loosen the two bolts and nuts in the back of
the vertical tube. See Figure 6-12. Allow the arm
assembly to lower until the arm contacts the
seat.
Figure 6-12
4.
Lower the platform approximately 2
"
to 3
"
and allow the arm to drop along with the seat.
Retighten the two bolts and nuts. Figure 6-13.
Figure 6-13
5.
Run the lift up until the top of travel and when
you hear the clutch.
Re-tighten the 2
bolts and nuts.
You can alter the position of the arm by removing
the top shaft collar, retracting the T-handle and re-
inserting the arm from above or below.
See Figure 6-14.
NOTICE
Summary of Contents for AL003
