5.1.1: MONO INPUT CONTROLS
CHANNEL CONTROLS > MONO INPUT CONTROLS
5.1.1: MONO INPUT CONTROLS
HPF 100Hz
Activate the High Pass Filter
The High Pass Filter (HPF) is an 18dB/Octave filter that attenuates frequencies below 100Hz. This can be useful for
filtering out low ‘rumble’ from microphones affected by very low frequencies originating from for example, traffic
noise, air flow and so on.
HF Level
Adjust the boost/attenuation of the high frequency shelving filter
The HF shelving filter has a fixed frequency of 12kHz. Frequencies above this will be boosted or attenuated depend-
ing on the control setting. See section 1.02 for more detail.
MF Level
Adjust the boost/attenuation of the mid-frequency bell filter
This will adjust the gain or attenuation of the audio band centred according to the MF Frequency. This is an asym-
metric EQ, so boost has a wide bandwidth (low Q), and cut has a narrow bandwidth (High Q). See section 1.0.2 for
more detail.
LF Level
Adjust the boost/attenuation of the low frequency shelving filter
The LF shelving filter has a fixed frequency of 80Hz. Frequencies below this will be boosted or attenuated depend-
ing on the control setting. See section 1.02 for more detail.
NOTEPAD
5, 8FX, 12FX
User Manual
