Harman Martin ERA 150 Wash, User Manual

Page: 23 / 52

Martin ® ERA 150 Wash User Guide 23
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Display intensity
To set the brightness of the control panel display:
1. Select DISPLAY → DISPLAY INTENSITY and press ENTER.
2. Use the DOWN and UP buttons to adjust the brightness of the display
from 10% to 100%.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Temperature units
To set the fixture to display temperatures in degrees Celsius or Fahrenheit:
1. Select DISPLAY → TEMPERATURE UNIT and press ENTER.
2. Use the DOWN and UP buttons to select °C or °F.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Resetting to factory defaults
To reset the fixture to its factory default settings:
1. Select FACTORY DEFAULT and press ENTER to confirm.
2. Use the DOWN and UP buttons to select YES to erase any custom
settings that you have configured and reset the fixture to its factory
default settings, or select NO.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Note that this does not affect the fi xture’s calibration settings.
Fixture test
You can run an automatic sequence to test all the fixture’s effects or
manually test individual effects using the control menus.
Automatic effects test
To perform a complete test of all of the fixture’s effects:
1. Select FIXTURE TEST → TEST ALL and press ENTER to confirm. The
automatic test will run.
2. To stop the test and return to the previous level of the menu structure,
press MENU.