15
VTX B
15
| User Manual
STEPS:
• Remove the four M6 HEX bolts holding the bracket onto the B15.
• Rotate the bracket to the extended position.
• Install the bolts.
• Repeat for the other side.
1
2
TOOLS REQUIRED:
A Torx T25 wrench is required to remove the four bolts holding the ACC brackets. All bolts should
be torqued to 2.82 Nm (25 in-lbs).
7.1 CASTER BOARD INSTALLATION
Two caster board tabs at the front of the B15 are used to secure the front face ACC caster board to the B15. The tabs are retractable
and ship from the factory in the retracted position inside the B15. This orientation is ideal when B15s are used in an installation, where
the tabs are not needed, but the tabs must be rotated to attach the caster board to the B15.
4
1
2
2
3
1
2
3
4
4
3
2
Summary of Contents for JBL Professional VTX Series
Page 1: ...VTX B15 User Manual...
Page 33: ......
