Harman JBL CINEMA SB550, Owner'S Manual

Page: 10 / 17

10 10
5.2.3 Connect to another Bluetooth device
3S
1. In the Bluetooth source, hold on the soundbar or on the
remote control until the status indicator flashes blue.
→
The soundbar enters the Bluetooth pairing mode.
2. Follow Step 3 under “ 5.2.1 Connect a Bluetooth device ” .
• If the device has ever been paired with the soundbar, first
unpair “ JBL CINEMA SB550 ” on the device.
NOTES:
– The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 10 m / 33 ft.
– Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
soundbar, such as microwaves and wireless LAN devices.
6. PLAY
6.1 Power-on/Auto standby/Auto wakeup
2 1
1 2
3
Switch on
1. Connect the soundbar and subwoofer to power by using the
supplied power cords.
2. To switch on, press on the soundbar or on the remote
control.
→
The subwoofer is connected to the soundbar automatically.
→
Connected
: The connection status indicator turns solid
amber ( ).
NOTES:
– Use the supplied power cord only.
– Before switching on the soundbar, make sure that you have
completed all other connections (See “
5.1 TV connection
”).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. The subwoofer also goes to
standby, and the connection status indicator slowly flashes
amber (
).
→
Next time you switch on the soundbar, it returns to the last
selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
• the soundbar is connected to your TV through the HDMI
ARC connection and your TV is switched on;
• the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable.