www.jbl.com
English
9
9
To connect to another Bluetooth device
3S
1. In the Bluetooth source, press and hold on the soundbar or
on the remote control until the status indicator flashes blue.
→
The soundbar enters the Bluetooth pairing mode. The
status indicator flashes blue.
2. Follow Step 3 under “Connect a Bluetooth device”.
•
If the device has ever been paired with the soundbar, first
unpair “
” on the device.
NOTES:
−
The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 33 ft (10 m).
−
Electronic devices may cause radio interference. Devices that generate
electromagnetic waves must be kept away from the soundbar, such
as microwaves and wireless LAN devices.
6 PLAY
6.1 Power-on/Auto standby/Auto wakeup
2
1
AC~
SUBWOOFER OUT
Switch on
1. Connect the subwoofer with the soundbar by inserting the
subwoofer plug into the
jack on the
soundbar.
2. Connect the soundbar to power by using the supplied power
cord.
3.
Press
to switch on.
→
The subwoofer is connected to the soundbar automatically.
Connected: The connection status indicator
turns solid
amber (
).
NOTES:
−
Use the supplied power cord only.
−
Before switching on the soundbar, make sure that you have
completed all other connections (See
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. Next time you switch on the
soundbar, it returns to the last selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
•
the soundbar is connected to your TV through the HDMI
ARC connection and your TV is switched on;
•
the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable.
