18
18
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the /-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control IR learning
Through IR learning, your Infra-red TV remote control can learn
some commands of the soundbar.
1. On the soundbar, press and hold and until
“LEARNING”
is displayed.
J
You enter the TV remote control learning mode.
2. Point your TV remote control at the soundbar. Follow the
screen instructions to operate the buttons on your TV remote
control:
•
When any one of
“POWER”
,
“VOL+”
,
“VOL-”
, or
“MUTE”
is displayed on the soundbar, press the desired
button on your TV remote control.
J
“DONE”
: The functions of the soundbar button are
learnt by your TV remote control buttons.
J
The soundbar returns to the last selected source.
•
To stop and exit the TV remote control learning mode,
press and hold and on the soundbar until
“EXIT
LEARNING”
is displayed.
J
The learnt functions are discarded.
NOTES:
–
The soundbar will exit the TV remote control learning mode
automatically if no action is taken for 30 seconds. The learnt
functions are discarded.
7.3 Play from the HDMI IN source
With the soundbar connected as shown, your digital device can
play video on your TV and audio from the soundbar speakers.
HDMI OUT
2
1
.
.
.
HDMI (ARC)
HDMI (ARC)
1. Make sure that the soundbar has been properly connected
to your TV and digital device (See “
”).
2. Switch on your digital device.
J
Your TV and the soundbar wake up from standby mode
and switch to the input source automatically.
•
To select the
HDMI IN
source on the soundbar,
toggle
on the soundbar or
HDMI
on the remote
control.
3. Switch your TV to standby mode.
J
The soundbar and source device are switched to standby
mode.
NOTES:
–
Full compatibility with all HDMI-CEC devices is not guaranteed.
7.4 Play from the Bluetooth source
Through Bluetooth, stream audio play on your Bluetooth device
to the soundbar.
.
<
10 m / 33 ft
× 1
×2
×3
1. Check that the soundbar has been properly connected to
your Bluetooth device (See “5.2 Bluetooth connection”).
2. To select the Bluetooth source, press on the soundbar or
on the remote control.
3. Start audio play on your Bluetooth device.
•
Alternatively, press
on the remote control to control
playback.
4. Adjust the volume on the soundbar, remote control or your
Bluetooth device.
7.5 Play through the JBL One app
Through the JBL One app, stream audio from online music
services to the soundbar.
1. On the soundbar,
•
Check that the soundbar has been properly connected to
your home network (See “
”).
Summary of Contents for JBL BAR 800
Page 1: ...BAR 800 OWNER S MANUAL...
