22
IMPORTANT SAFETY INSTRUCTIONS
Verify Line Voltage Before Use
The JBL Bar 700 (soundbar, detachable speakers and subwoofer)
has been designed for use with 100-240 volt, 50/60 Hz AC
current. Connection to a line voltage other than that for which
your product is intended can create a safety and fire hazard
and may damage the unit. If you have any questions about the
voltage requirements for your specific model or about the line
voltage in your area, contact your retailer or customer service
representative before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied
with your unit. We do not recommend that extension cords be
used with this product. As with all electrical devices, do not run
power cords under rugs or carpets, or place heavy objects on
them. Damaged power cords should be replaced immediately
by an authorized service center with a cord that meets factory
specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always
pull the plug; never pull the cord. If you do not intend to use this
speaker for any considerable length of time, disconnect the plug
from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product.
Opening the cabinet may present a shock hazard, and any
modification to the product will void your warranty. If water
accidentally falls inside the unit, disconnect it from the AC power
source immediately, and consult an authorized service center.
Summary of Contents for JBL BAR 700
Page 1: ...BAR 700 OWNER S MANUAL...
