Harman JBL BAR 5.0 MULTIBEAM, Owner'S Manual

Page: 17 / 25

www.jbl.com
E
ngli
sh
17 17
2. Switch on your digital device.
→
Your TV and the soundbar wake up from standby mode
and switch to the input source automatically.
• To select the source on the soundbar, press
on the soundbar or on the remote control.
3. Switch your TV to standby mode.
→ The soundbar and source device are switched to standby mode.
NOTES:
−
Full compatibility with all HDMI-CEC devices is not guaranteed.
7.3 Play from the Bluetooth source
Through Bluetooth, stream audio play on your Bluetooth device
to the soundbar.
< 10 m / 33 ft
1. Check that the soundbar has been properly connected to
your Bluetooth device (See “5.2 Bluetooth connection” in the
“5. CONNECT” chapter).
2. To select the Bluetooth source, press on the soundbar or
on the remote control.
3. Start audio play on your Bluetooth device.
4. Adjust the volume on the soundbar or your Bluetooth device.
7.4 Play through Chromecast built-in
Through Chromecast built-in, stream audio on your Android or
iOS device to the soundbar.
1. On the soundbar,
•
Check that the soundbar has been properly connected to
your home network (See “5.3 Connection with your home
network”
in the “5. CONNECT” chapter).
2. On your Android or iOS device,
a) Check that your Android or iOS device has been
connected to the same network as the soundbar.
b) On a Chromecast-enabled app, play music, tap the cast
icon and select the connected soundbar.
CHROMECAST
3. To exit from the music playback, switch to other sources.
7.5 Play through AirPlay
Through AirPlay, stream audio on your iOS device to the soundbar.
1. On the soundbar,
• Check that the soundbar has been properly connected to
your home network (See “5.3 Connection with your home
network”
in the “5. CONNECT” chapter).
2. On your iOS device,
a) Check that your iOS device has been connected to the
same network as the soundbar.
b) To enter the Control Center on an iOS device, swipe down
from the upper right corner or swipe up from the bottom
edge (iOS 11 or earlier). Tap to select the connected
soundbar and then, start audio streaming from an app.
usic
ining Room speaker
Phone
AIRPLAY
3. To exit from the music playback, switch to other sources.
7.6 Play through Amazon Music
With the soundbar connected to Alexa, you can stream music
from the Amazon Music library to the soundbar.
ALEXA MUSIC READY
Play
1. Check that the soundbar has been properly connected to
the Amazon Alexa app (See “5.3.4 **Wi-Fi setup through the
Amazon Alexa app”
in the “5. CONNECT” chapter).
2. Launch the Amazon Alexa app to start music playback.
• Open the Amazon Music app to access the Amazon
Music library.
•
Refer to the Amazon Alexa app for more details.