www.jbl.com
E
ngli
sh
9
8 RESTORE FACTORY SETTINGS
By restoring the default settings defined at factories, you remove
all your personalized settings from the soundbar.
•
On the soundbar, press and hold
and
for more than 10
seconds.
9 SOFTWARE UPDATE
For optimal product performance and your best user experience,
JBL may offer software updates for the soundbar system in the
future. Please visit www.jbl.com or contact JBL call center to
receive more information about downloading update files.
1.
Check that you have saved the software update file to the root
directory of a USB storage device. Connect the USB device
to the soundbar.
USB
2.
To enter the software update mode, press and hold
and - on
the soundbar for more than 10 seconds.
→
When software updating is complete, you will hear a
confirmation tone.
→
The soundbar returns to the last selected source.
NOTES:
−
Keep the soundbar powered on and the USB storage device mounted
before software updating is complete.
10 PRODUCT SPECIFICATIONS
General specification:
•
Power supply: 100 - 240 VAC, ~ 50/60 Hz
•
Total speaker power output (Max. @THD 1%): 80 W
•
Soundbar output power (Max. @THD 1%): 2 x 40 W
•
Soundbar transducer: 2 x racetrack drivers
•
Soundbar standby power: <0.5 W
•
Operating temperature: 0°C - 45 °C
Video specification:
•
HDMI Video output (With Audio return channel): 1
Audio specification:
•
Frequency response: 70 Hz - 20 KHz
•
Audio inputs: 1 Optical, Bluetooth, USB (USB playback is
available in US version. For other versions, USB is for Service
only.)
USB specification (Audio playback is for US version only):
•
USB port: Type A
•
USB rating: 5 V DC / 0.5 A
•
Supporting file format: mp3, wav
•
MP3 Codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG
2.5 Layer 3
•
MP3 sampling rate: 16 KHz - 48 KHz
•
MP3 bitrate: 80 kbps - 320 kbps
•
WAV sample rate: 16 KHz - 48 KHz
•
WAV bitrate: Up to 3000 kbps
Wireless specification:
•
Bluetooth version: 4.2
•
Bluetooth profile: A2DP V1.3, AVRCP V1.5
•
Bluetooth frequency range: 2402 MHz - 2480 MHz
•
Bluetooth Max. transmitting power: <10 dbm (EIRP)
•
Modulation type: GFSK, π/4 DQPSK, 8DPSK
Dimensions:
•
Soundbar dimensions (W x H x D): 614 x 58 x 90 mm /
24.17” x 2.28” x 3.54”
•
Soundbar weight: 1.61 kg
•
Packaging dimensions (W x H x D): 855 x 125 x 145 mm
•
Packaging weight (Gross weight): 2.6 kg
11 TROUBLESHOOTING
Never try to repair the product yourself. If you have problems
using this product, check the following before you request
services.
System
The unit will not turn on.
•
Check if the power cord is plugged into power and the
soundbar.
The soundbar has no response to button pressing.
•
Restore the soundbar to factory settings (See the
“RESTORE FACTORY SETTINGS” chapter).
Sound
No sound from the soundbar
•
Make sure that the soundbar is not muted.
•
Select the correct audio input source on the remote control.
•
Connect the soundbar to your TV or other devices properly.
•
Restore the soundbar to its factory settings by pressing
and holding
and
on the soundbar for more than 10
seconds.
Distorted sound or echo
•
If you play audio from your TV through the soundbar, make
sure that your TV is muted or the built-in TV speaker is
disabled.
Audio and video are not synchronized.
•
Enable the audio sync function to synchronize audio and
video (See “Audio sync” in the “SOUND SETTINGS” chapter).
