background image

Obtaining Other Language Versions:

 To obtain information in another language about the use 

of this product, please contact your local Crown Distributor. If you need assistance locating your 

local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. 

Nor does it cover every possible situation which may arise during installation, operation or 

maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, 

updates to this information may have occurred. To obtain the latest version of this manual, please 

visit the Crown website at www.crownaudio.com.
Later versions of this manual and additional information about this product may be available at the 

Crown website at www.crownaudio.com.

Trademark Notice:

 Crown and Crown Audio are registered trademarks of Crown International. 

Other trademarks are the property of their respective owners.
©2012 by Harman International. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. 

Telephone: 574-294-8000

Models: XLi 800, XLi 1500, XLi 2500, XLi 3500

XLi Series 

Operation Manual

5015442  -  04/12

Summary of Contents for Crown XLi Series















Reviews: