Harman Crown I-T12000 HD Operation Manual Download Page 1

Operation Manual

Obtaining Other Language Versions:

 To obtain information in another language about the use of this product, please contact your 

local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible 

situation which may arise during installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have 

occurred. To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio, IQ, BCA, and Amcron are registered trademarks of Crown International. HiQnet is a trademark 

of Harman International Industries, Inc. Other trademarks are the property of their respective owners.

Some models may be exported under the name Amcron.

®

©2008 by Crown Audio

®

 Inc., 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000

I-Tech HD Series  

140811-1 
5/11

I-T5000 HD

I-T9000 HD

I-T12000 HD

Summary of Contents for Crown I-T12000 HD





























































Reviews: