![Harman AMX PR-WP-412 Hardware Reference Manual Download Page 46](http://html.mh-extra.com/html/harman/amx-pr-wp-412/amx-pr-wp-412_hardware-reference-manual_597963046.webp)
46
Configuration Commands-Output
No. Command
Description
Variables
Example
1.
get vidout
portname:
<output
channel>
Get the name of the
specified output
port
<output channel>=
1~2
Command sent:
>get vidout portname:1
Response:
output 1 is named as meeting room 1
2.
set vidout
portname:
<output
channel>,<name>
Set the name of the
specified output
port
<output channel>=
1~2
<name= name string
Command sent:
>set vidout portname:1,Meeting Room 2
Response:
output 1 is named as meeting room 2
3.
get vidout
hdcp:
<output
channel>
Get HDCP mode for
the specified output
<output channel>=
1~2
Command sent:
>get vidout hdcp:1
Response:
output 1 is set to AUTO HDCP mode
4.
set vidout
hdcp:
<output
channel>,<hdcp_m
ode>
Set HDCP mode for
the specified output
<output channel>=
1~2
<hdcp_mode=
{
AUTO,
HDCP2.2,
HDCP1.4,
NO-HDCP
}
Command sent:
>set vidout hdcp:1,hdcp2.2
Response:
output 1 is set to HDCP2.2 mode
5.
get vidout res
Get video resolution
for the specified
output
<output channel>=
1~2
Command sent:
>get vidout res:1
Possible response message includes:
▪
output 1 resolution is
1280x720p,50
▪
output 1 resolution is no signal
6.
set vidout
res:
<resolution>
Set video solution
for the specified
output; it will
change to manual
scaling mode
automatically if
under Auto scaling
mode
<resolution>=
<H>x<V<i/p>,<Rate>
<Specific Info>
{
640x480p,60
720x480p,60
720x576p,50
800x600p,60
1024x768p,60
1280x720p,50
1280x720p,60
1280x768p,60
1280x800p,60
Command sent:
>set vidout res:1,4096x2160p,60
Possible response message includes:
▪
output resolution is set to 4096x2160p,60
▪
unsupported resolution