33
Network Commands
No. Command
Description
Variables
Example
1.
get friendly
Get device's
hostname
Command sent:
>get friendly
Response:
--Current device friendly name:PR-WP-412
2.
set friendly
Set device's
hostname
Command sent:
>set friendly
Response:
Please input friendly name:
Old friendlyname: PR-WP-412
New friendlyname: PR-WP-412
Would you like to save this setting(Y/N)y
Setting is ok , you should reboot that make it effective
>--Current device friendly name:PR-WP-412
3.
get ip
Show the IP
configuration of this
device
Command sent:
>get ip
Response:
IP Settings
------------------------------------------
HostName: PR-WP-412
Type: dhcp
IP Address: 192.168.5.149
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.5.254
MAC Address: f8:22:85:00:14:72
4.
set ip
Setup the IP
configuration of this
device
Command sent:
>set ip
Response:
Enter Host Name: PR-WP-412
Enter IP type. Type D for DHCP, or S for Static IP and
then Enter:S
Enter IP Address: 192.168.1.20->192.168.1.20
Enter Subnet Mask: 255.255.255.0->255.255.255.0
Enter Gateway IP: 0.0.0.0->0.0.0.0
--You have entered:
Host Name PR-WP-412
Type Static IP
IP Address 192.168.1.20
Subnet Mask 255.255.255.0
Gateway IP 0.0.0.0
