Chapter 2: Installing and Configuring the NVR
20
N6123 NVR User Manual
Control Options
SVSI’s N-Control solutions (N-Command, N-Act, and N-Touch) provide you with the most flexible management options available,
insuring you are getting the most from your digital media system.
Primary Control Options
During initial configuration and setup, the free N-Able setup utility is sufficient. However, we do not recommend N-Able for
production-level, primary-user control.
N-Command Controllers
These web-based hardware Controllers offer intuitive, powerful management of equipment, content, NVR recording/playback,
bandwidth utilization, and AV switching (using a web-based, point-and-click graphical matrix). The N-Command product line also
offers:
Simplified ASCII interface for third-party control via TCP/IP.
N8002 and N8012 controllers have master/
client
failover protection.
N8012 controller has hot-swappable drives and redundant power supplies.
Graphical presentation of video network connections.
Full configuration control: assign fixed IP addresses for each SVSI component, adjust variable bit-rate for each video
stream, etc.
Additional software bundles (free with N-Command) allow you to easily create attractive touch panels for N-Series and
third-party equipment control, as well as build software design walls of any size. Visit our website for more details on the
available N-Command Controllers.
Third-Party Controllers
The N6123 is capable of interfacing with third-party control systems such as Crestron. For direct control of N6123 units from any
Third Party Control system, please use the Direct Control API (available on our website).
N-Touch | IP Wall Controller
This 240 x 320 capacitive touch display has Wi-Fi and Bluetooth for expanding control to mobile devices. Programming is done
individually through the built-in web server or collectively to multiple units using an N-Command N8000 Series Controller. Multi-
page custom graphics can be created using the free Panel Builder software (stored internally).