Harman AMX N3000 Series, Instruction Manual, Page: 43 / 72

Encoder Configuration Options
43
N3000 Series User Manual
Record Page
Click the Record link at the top of any of the main web pages to access the page shown in Figure 36 . This page allows you to set up
recording options on the Encoder and to customize when/if the unit transfers the recorded files to another location. See Table 14
for option descriptions. This page is only applicable to the N3132 Encoder.
FIG. 36
Record Page
TABLE 14
Record Page Options
Option Description
Command buttons
Start Record button Click to begin recording to the USB device plugged into the front of the N3132 Encoder.
Stop Record/Transfer
File button
Click to stop a recording and start the file transfer.
Format USB Click to format the USB device plugged into the front of the N3132 Encoder.
Status section (read-only)
USB State Displays the state of the current USB connection. When the unit is properly configured and the USB device is
validated, Device Ready is displayed. See the USB Port setting below for more information.
Free Space Indicates file space left on the USB device.