background image

AV FOR AN IT  WORLD

®

QUICK START GUIDE 

MT-2002 

20.3” Modero G5 Panoramic Tabletop Touch Panel

 

Overview

 

The MT-2002 20.3” Modero G5 Panoramic Tabletop Touch Panel
(FG5969-35) features the G5 Graphics Engine to provide fast and smooth
animations and transitions, as well as a Quad Core Processor.
The MT-2002 features a panoramic capacitive multi-touch screen that
provides users access to multiple applications with minimal navigation. The 
distinctive, low-profile design is engineered to sit perfectly on a table without
obstructing views.

Sleep button

Sleep button

USB Ports (2)

Cable slot

FIG. 1  

MT-2002

Product Specifications

MT-2002 SPECIFICATIONS

Dimensions (HWD)

9 3/16” x 20 3/8” x 5 7/8” (235 mm x 519 mm x 150 mm)

Weight

12.3 lbs (5.58 Kg)

Power
Consumption

Full-On: 35 W (12V 

...

, 2.9A)

Standby: 7 W (12V 

...

, 0.58A)

External Power
Supply Required

Requires one of these AMX power sources (not included):

•  PSR5.4 Power Supply, 12 VDC, 5.4A, 3.5mm Phoenix Connector with 

Retention Screws (FG423-48)

•  MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)

Certifications

•  FCC Part 15 Class B
•  AS/NZS  CISPR 32 Class B
•  CE EN 55032, 55035, 60950-1
•  CB Scheme IEC 60950-1
•  IC
•  IEC/EN-60950
•  UL 60950-1
•  RoHS/WEEE compliant

Environmental

•  Temperature (Operating): 32°F to 104°F (0°C to 40°C)
•  Temperature (Storage): 4°F to 140°F (-20°C to 60°C)
•  Humidity (Operating): 20% to 85% RH
•  Humidity (Storage): 5% to 85% RH
•  Power (“Heat”) Dissipation: 

On: 119.4 BTU/hr 
Standby: 23.9 BTU/hr

Included
Accessories

•  Locking 2-pin Phoenix connector (41-0002-SA)
•  MXA-USB-C, USB Port Cover Kit (FG5968-18)
•  HPG-10-10K, 3/4” Mini-Grommet (FG570-01)
•  MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)

Connector Locations

 

Two Type A USB ports are located on the rear right corner of the device (FIG. 2).

Type A USB Ports

Speaker

Sleep button

FIG. 2  

MT-2002-REAR VIEW 

USB peripherals (mouse, keyboard, etc.) may be connected to either of the two

USB ports on the rear of the device.

The power and Ethernet connectors, as well as an additional USB port are 

located on the bottom of the device (FIG. 3).

The underside USB port, as well as the two rear USB ports, may be used with a

flash drive for page transfers or firmware upgrades.

Ethernet

10/100 Port

Type A USB Port

12V 

... 

Power Port

FIG. 3  

MT-2002 UNDERSIDE CONNECTORS 

The MT-2002 does not have individual channels on the base of the device

to allow passage of cables from underneath the base. Instead, it has one slot at

the base to allow options on cable configuration, with channels for securing

power and Ethernet cables (FIG. 4).

Ferrite

Tie-wrap channels

Tie-wrap

FIG. 4  

TIE-WRAP FOR POWER CONNECTOR FERRITE 

Each channel side has slots for attaching tie-wraps to secure each cable. The

ferrite on the power cable must be secured with the included tie-wrap during

installation to prevent the possibility of the panel not sitting flush on the table.

Other cables may be secured with tie-wraps if desired, but this is not necessary.

Wiring Guidelines

 

The MT-2002 uses a 12V 

... 

-compliant power supply to provide power to

the panel via the 2-pin 3.5 mm captive wire PWR connector.

The incoming PWR and GND wires from the power supply must be connected to

the corresponding locations within the PWR connector.

Note: Apply power to the panel only after installation is complete.

Note: Connecting power to the MT-2002 should be done using the included 

2-pin 3.5mm captive wire connector included with the device. This connector 

is retained within its port with locking screws instead of the pins on each side of 

standard captive wire connectors, and using force to insert a standard captive 

wire connector may damage the device.

Reviews: