4
SOUNDSTICKS
®
III
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle, 65W
maximum
Subwoofer
Transducer (1): 6” woofer
Amplifier output power: 20W RMS
Dimensions (W x H): 9-3/16” x 10-3/16”
(232mm x 258mm)
Weight: 4 lb (2.2kg)
Satellite
Transducers (4): 1” full-range per channel
Amplifier output power: 10W RMS per
channel
Dimensions (W x H): 2” x 10”
(51mm x 254mm)
Weight: 1.5 lb (0.7kg)
R
L
R
L
Step 1. Place individual
SoundSticks® III (satel-
lites) beside monitor/
computer.
Step 2. Place subwoofer
as desired, but place-
ment under your desk
will provide optimal
performance.
Step 3. Connect satellite
cables to the dual
subwoofer cable. Also
connect the input cable
to the subwoofer input
cable jack.
Step 4. Insert
SoundSticks III input
cable into the computer
or other audio device.
Troubleshooting
Symptom
Possible problem
Solution
No sound from SoundSticks III
speaker system.
No power to subwoofer.
Power adapter plug not inserted
correctly.
No volume or low volume.
Ensure power supply is connected to live power source and is
properly connected to subwoofer. Please note: When subwoofer is
powered, a power LED should light.
Place plug with arrow symbol facing UP into the subwoofer.
Touch the volume “Up” (+) pad on the volume control satellite to
unmute and/or increase the system volume level.
Note: Touching the volume “Down” (–) pad lowers the system
volume. Touching both (+) and (–) volume control pads at the same
time will mute the system.
*These specifications are subject to change without notice.
0211CSK - HK Soundsticks III v2.indd 4
21/04/10 15:01:02
