![Harley Benton CG-10X Street Quick Start Manual Download Page 1](http://html1.mh-extra.com/html/harley-benton/cg-10x-street/cg-10x-street_quick-start-manual_3932374001.webp)
IMPORTANT SAFETY INSTRUCTIONS
GUITAR AMPLIFIER
CG-10X STREET
CAUTION
To reduce the risk of fire or electric shock. Do not expose this apparatus to rain or moisture. To reduce the
risk of electric shock. Do not remove cover. Refer servicing to qualified service personnel for repair this
apparatus.
Voltage: AC 220V~50Hz
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert you to the presence of
important operating and servicing instructions.
The lighting flash & arrowhead symbol, within an equilateral triangle, is intended to alert you to the
presence of danger.
SPECIAL INSTRUCTIONS FOR BATTERY AMPLIFIER
1
8
9
10
3
5
11
13
12
7
6
4
2
PANEL DESCRIPTION
1. INPUT(1/4" MONO) :
Use this jack to connect your guitar to the
amplifier.
2. VOLUME
Use this control in conjunction with your
instrument's volume controls to adjust the
output level of Channel A.
3. CHA-LED
This LED illuminates when the Channel A
is selected.
4. CHA/CHB SWITCH
Use This switch to select the Channel A or
Channel B. When the switch is depressed,
the Channel B is selected. With the switch
in the out position, the Channel A is selected.
The external footswitch is active only when
the Channel A is selected.
CHA
CHB
5. CHB-LED: This LED illuminates when the Channel B is selected.
1. Connect the amplifier ONLY to a properly grounded AC outlet of the proper voltage for your amp.
2. Avoid the thread to be under kick or heavily hustled.
3. Do not block any ventilation openings on this amplifier.
4. Do not operate near any heat source.
5. Do not expose this amplifier to rain or moisture.
6. Disconnect the power cord if the amplifier is not in use for longer period.
7. To reduce the risk of electric shock, DO NOT remove the cover.
Please read before using this product and strictly follow the owner's manual
Please keep this manual for future reference.
1. When connecting AC Power Supply, the chargeable circuit works under power on/off mode.
Please disconnect AC Power Supply if the unit is not in use or the battery full charged.
2. Under CHARGE mode, the charge indicator is bright; the indicator is extinct when battery full charged.
3. To prolong the battery life and saving your cost, suggest using AA type Ni-MH rechargeable (x10)
battery, Maximum 10-hour continuous use.
4. When using dry battery, please DISCONNECT AC Power Supply.