Harken Top-Crank LokHead Rigging Winch 500, Instruction Manual

Page: 36 / 330

The Winch must not be used:
- for uses other than those outlined in the “Intended Use” paragraph, that are for uses not mentioned
in this manual or different from those mentioned
- if unauthorised modifications or interventions have been carried out owing to the replacement of
parts with non-original spare parts
- in an explosive atmosphere
- in a flammable atmosphere
- after a fall from a height of more than 1 metre onto a hard surface. In this case, send the Winch
to the manufacturer or to an authorised Harken service centre
- with wire ropes
- with textile ropes with different diameter or types other than those envisaged
- with loads greater than the Maximum Working Load (MWL) of 500 kg for lifting/lowering loads
- in case of failure to follow the procedures in this Manual with particular reference to those for
positioning and fixing
- if the machine is used by personnel in unsuitable psychophysical conditions
- if the machine is used without following the safety regulations, the technical standards, and the
laws in fore in the place in which the machine is put into operation
9. IMPROPER USE
WARNING!
Subjecting the Winch to loads greater than the Maximum Working Load (MWL) can cause the Winch
or mounting surface to break suddenly, with the risk of serious injury or death.
36 22/06/2023
10. CLOTHING AND PPE
Operators must not work with loose long hair and must not wear any loose-fitting clothing which could
get caught in moving parts of the Winch. Appropriate work clothes consist of tight-fitting clothing,
especially for the upper limbs.
Wear mechanical protection gloves when using the Winch.