INSTRUCTIONS
V
™
Sheaves
Specifications
WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com/manuals for additional safety information.
High-load titanium V sheaves feature angled titanium rollers. Snap fit Delrin
®
side covers
require no tools to disassemble for maintenance. V sheaves mount into spar or deck
sheave boxes. The bearing system combines axial and thrust bearings into a single
bearing set of angled titanium rollers. Use the wide sheave for two-sheet peels. Use the
wide-tulip sheaves to handle a single line with line-entry range of deflecting angles.
A - Sheave Ø
B - Center Ø
C - Sheave Width
Max line Ø
Maximum working
load
Breaking load
Part
No.
Name
mm in
mm
in
mm
in
mm
in
kg
lb
kg
lb
3355
1.5T
47 1.85
15.9 0.626
18.8 0.74
9 11/32
1500 3300
3000 6600
3384
1.5T
Wide
47 1.85
15.9 0.626
27.4 1.08
2X
9
2X
11/32
1500 3300
3000 6600
3356
3T
56 2.20
22.86 0.900
19 0.75
11 7/16
3000 6600
6000 13200
3358 3T Wide
Tulip
56 2.20
15.9 0.626
30
1.18
2X
11 2X 7/16
3000 6600
6000 13200
3357
5T
62 2.44
22.86 0.900
23.9 0.94
13
1/2
5000 11000
10000 22000
3382 5T Wide
62 2.44
22.86 0.900
32.3 1.27
2X
13
2X
1/2
5000 11000
10000 22000
3378 5T Wide
Tulip
62 2.44
22.86 0.900
35.3 1.39
2X
13
2X
1/2
5000 11000
10000 22000
3379
6.5T
82 3.23
33
1.299
29.1 1.48
16
5/8
6500 14300
13000 28600
3375
6.5T
Wide
Tulip
82 3.23
33
1.299
45.7 1.80
2X
16
2X
5/8
6500 14300
13000 28600
3377
8T
104 4.09
45
1.77
32.4 1.27
18 11/32
8000 17600
16000 35200
3376
8T Wide
Tulip
104 4.09
45
1.77
51.2 2.02
2X
18
2X
11/32
8000 17600
16000 35200
3380
12T
120 4.72
65
2.56
33.6 1.32
22
7/8
12000 26400
24000 52800
3383
12T
Wide
Tulip
120 4.72
65
2.56
65.5 2.58
2X
18
2X
11/32
12000 26400
24000 52800
3385
16 T
135 5.32
75
2.95
38.7 1.52
26 1 1/16
16000 35200
32000 70400
3381
20 T
155 6.10
75
2.95
40.4 1.59
30 1 3/16
20000 44000
40000 88000
A
B
Printed in USA 5202 7/19
Harken equipment requires minimal maintenance, but some maintenance is required to give
the best service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In corrosive
atmospheres, stainless parts can show discoloration around holes, rivets, and screws.
This is not serious and can be removed with a fine abrasive. Flush blocks thoroughly
with fresh water. Periodically, disassemble the blocks and clean with detergent and fresh
water. Important: Exposure to some teak cleaners and other caustic solutions can result in
discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance, and warranty information; www.harken.com/manuals or
the Harken catalog.
Warranty
General Maintenance
C
N15W24983 Bluemound Road • Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320 • Fax: (262) 691-3008 • Web: harken.com • E-mail: [email protected]
Sheave Profile
STANDARD
WIDE
WIDE TULIP
3355
3356
3357
3379
3377
3380
3385
3381
3382
3358
3378
3375
3376
3383
3384
