9.
How To Use:
Mode 1 [ Manual Mode ]
Package Contents
(K1)
Adjustable Roller
Lock knob (K1)
Pointer Lock
Knob (K2)
Pointer
Adjustable
Roller (R1)
Motorised Roller (M1)
Central Spindle (SP1)
4
5
9
10
1
1. Top Base Plate (White Diffuser) (W1) 1 Pc.
2. Top Base Plate (Transparent) T1 1 Pc.
3. Bottom Base Plate (Transparent) T2 1 Pc.
4. Pillars (P1) 4 Pc.
5. Tightening Knobs (K3) 4 Pc.
6. Motor Controller 1 Pc.
7. Power Adapter 1 Pc.
8. Cross Base 1 Pc.
9. Carry Bag 1 Pc.
10. Instruction Manual 1 Pc.
Turn the knob (K1) anti-
clockwise to loosen it.
(Note: only 1-2 turns of
the knob are sufficient
to loosen it)
1.
Central
Hole (H1)
(K2)
Tighten the knob K2 by turning it
clock-wise. A dimple in the pointer
base will match with an alignment
slot so as to position the pointer
correctly.
5.
}
Note: R1 Should be at a higher level to M1
(K1)
(R1)
M1
Lock by turning knob
(K1) clock-wise.
2b.
2a.
Place the Base plate (T2)
by aligning its central hole
(H1) with the central spindle
(SP1) Press down gently so
that the (SP1) fits snugly
into hole (H1)
6.
Loosen the pointer
tightening knob (K2) by
turning it anti-clockwise
3.
3
2
6
Base Plate
(T2)
Once loose move the pointer to
the position as shown:
4.
Place the Base Plate (T1) on
the Pillars by aligning with the
Base Plate (T2).
8.
Put each Pillar (P1) on the
side hole of the Base Plate
(T2) and tight with tighten
knob (K3).
7.
Place the Top Base Plate
(White Diffused) (W1) on the
transparent Base Plate (T1).
Make sure all Plates are
aligned simultaneously.
7
8
Specification:
Diameter
:
460 mm
Max Speed:
3.5 rpm
Min Speed:
0.3 rpm
7.5 Kg
Max Load:
W1
T1
T2
Page 1 of 2
R
Instruction Sheet
Rotary Turn-Table R470M-2
Raise the knob
( and the roller R1)
upwards.
