ASSEMBLY INSTRUCTIONS FOR
Photo Table 1575
SUPPORTING STRIP
2 pc.
ROUND KNOBS
6 pc.
WING
KNOBS
12 pc.
NOTE : Step 1,2,3 and 4 are to be done with the photo-table parts lying flat on the ground.
Using the round knobs provided
attach the rear-lower support tube
from both ends.
Step 2:
Using the round knobs provided
attach the front-lower support
tube from both ends.
Step 3:
Using the round knobs provided
attach the front support tube
Step 4:
Step 1:
Lay out the left side A-Support
and the right-side A-Support as
shown in pic
Rear Lower
Support Tube
Front Lower
Support Tube
Front
Support
Tube
Right Side
A-Support
Left Side
A-Support
Open the photo table
chassis - it should look
like this.
Step 5 :
Step 6:
By using wing knobs attach the Extensions Pipes on the top of the
Left-side A-Support and the Right-side A-Support.
R
Page 1 of 2
Package Contents:
TOP SUPPORT
TUBE
FRONT SUPPORT
TUBE
LEFT-SIDE
A-SUPPORT
RIGHT-SIDE
A-SUPPORT
REAR-LOWER SUPPORT TUBE
FRONT-LOWER SUPPORT TUBE
EXTENSION PIPES
2 pc.
PHOTO TABLE
SHEET
HOLES
Note: The locking brackets
should be facing upward
CARRY
BAGS
