HARGASSNER Classic 12, Operation Manual

Page: 53 / 64

IV
HARGASSNER Heating technology for
Biomass
A 4952 Weng OÖ Tel.: +43/7723/5274-0 Fax: +43/7723/5274-5 office@hargassner.at
53
Cleaning, Maintenance
2 Cleaning and maintenance

Boiler monitoring and cleaning intervals are based on the operation hours
and fuel quality.
Observe country-specific regulations and the inspection and sweeping inter -
vals dictated by these.
Pos. Tasks of maintenance Interval
( a = annually
a
)
a. At least once annually, at the latest after 4000 full-load hrs, 8000 partial-load hrs or after a message has appeared on the
control panel
1 Tap off the turbulators and clean the turbulator space 1x a
2 Clean flue pipe 2x a
3 Clean post-combustion chamber with poker
(visual check via inspection glass)
1x a
(as required)
4
Clean combustion chamber with poker 1 x a (as required)
5 Remove ash box and clean out the ash under the grate 1x a
6
Dismount exhaust fan and clean housing and impeller 1x a
7 Grease stoker chain and check chain tension 1x a
8
Clean pellet vacuum turbine 1x a
9 Clean the pellet vacuum turbine filter. 1x a
10
Disconnect, remove and clean the lambda sensor 1x a
11 Ash box emptying as required
1
2
3
4
5
6
7
8
9
10