HARGASSNER Classic 12, Operation Manual

Page: 12 / 64

12
HARGASSNER Heating technology for
Biomass
A 4952 Weng OÖ Tel.: +43/7723/5274-0 Fax: +43/7723/5274-5 office@hargassner.at
III
2 Prior to commissioning
2.1 Checks prior commissioning
• Safety on-site and plumbing and electrical installations
• Installation of the boiler
• Check all necessary components
• Check they are secure, that each component is functioning correctly, that
the motors are rotating in the right direction, etc.
• Check the combustion chamber lining is positioned correctly.
2.2 Start of commissioning
Once the boiler has been installed properly and all the required safety devices
have been checked, the boiler can be commissioned in accordance with the
commissioning checklist in the commissioning book.
D A N G E R
Death, injuries or damage due to missing, defective or bypassed safety
devices or boiler parts
• Check safety devices and boiler parts carefully for proper and intended function
• Safety devices should not be modified or bypassed
• In case of a malfunction or defect, perform repair measures immediately.
• Place, position and function of all safety devices must be known
W A R N I N G
Danger of crushing from moving parts in the vicinity of the fuel
extraction system, ash extraction system and combustion grate
• Make sure that no persons stay in any danger zone
• Do not reach into any reachable mechanical parts.
• Do not stand on the boiler system.
• Make sure that no foreign parts (tools, etc.) remain within any boiler component
D A N G E R
Commissioning by untrained or unauthorised personnel Risks due to
unforeseeable operating conditions
• The switch-on / first start-up must be carried out by Hargassner Ges mbH or
specially trained staff .
A T T E N T I O N
The boiler must be commissioned by an engineer with a Hargassner commissioning
certificate. The completed commissioning checklist must be sent back to Hargassner
with the commissioning number within 30 days of the commissioning, otherwise the
warranty becomes void . A copy remains in the commissioning book on-site.