Hardy Floor Scales
33
OPTIONAL FOOT
RETAINER
Foot retaining plates are used to keep the scale from
sliding or moving when loads are applied. The plates
are bolted via anchors at each of the scales feet. (See
Fig. 27)
FIG. 27 FOOT RETAINER PLATES
INSTALLATION
NOTE:
The platform has been removed for clarity purposes.
Foot Retainer
Plates Installation
Step 1.
Place the Floor Scale in position.
Step 2.
Place the foot retainer plate under the foot,
plate edge should extend out from under
the scale.
Step 3.
Drill two (2) holes using a hammer drill.
(See Specifications/Anchor Bolt Holds
Summary of Contents for HIFS-3030-01-PS-T
