Hardy Process Solutions HIFS-3030-01-PS-T, Operation And Installation Manual

Page: 16 / 54

Hardy Floor Scales
6
drawing 0594-0010. (Available for download on
the Hardy Floor Scales webpage under Docs &
Programs).
FIG. 2 HI 6011 SUMMING JUNCTION CARD
3. Load Sensors - The Hardy series scales use four
(4) steel Advantage
®
load sensors with hermetic
seals. The output of each sensor is 2mV/V with 5
Volts DC excitation. For more specifications see
the electrical specification section of this manual.
4. INTEGRATED TECHNICIAN™ - A built-in
system diagnostics utility, continuously monitors
the weighing system for possible malfunctions.
This capability also allows the operator to rapidly
troubleshoot a weighing system from the control-
ler or indicator.
5. Leveling Feet - Each Hardy series scale comes
with four (4) 304 stainless steel adjustable level-
ing feet. The leveling feet are adjustable to a
maximum of 7mm (.275"). The leveling feet are
attached to each of the load sensors.
SITE PREPARATION • All mounting surfaces for the floor scale
should be level to within 3º, corner to corner,
end to end. Keep in mind that the adjustable
leveling feet have a maximum adjustment of
7mm (.275”).