Hardy Process Solutions HI 6500 Series, User Manual

Page: 102 / 202

92
Chapter 5
•
•
•
•
•
•
Diagnostics Parameter Menu
Diagnostics is covered extensively in Troubleshooting (Chapter 9).
The available parameters on the Web page are:
•
Parameters (which shows all parameters on the instrument)
•
Integrated Technician (when connected to an IT Junction Box)
•
C2
•
Stability test

The available parameters on the device are:
•
Stability test
•
Weight and Voltage
See the Chapter 9 for further information on Diagnostics.
Display Parameter Menu
The following sets of parameters are only active from the display panel when the display
panel is attached to the instrument. They are not enabled on the Web Page.
•
Backlight
•
Power Saving
•
Set Background
•
Set Foreground
•
Split Screen
o Display Mode
o Discover (Command)
o Num Display
o Display Order
Backlight Parameter
The Backlight parameter sets the display panel brightness level in 16 equal steps shown as
a progress bar on the instrument.
On the
HI 6500 series instrument display
, select the display menu and use the UP or
DOWN button to select the Backlight submenu. The current Backlight level will be
displayed, press the ENTER button if the value needs to be modified, and use the LEFT or
RIGHT buttons to set the required backlight level. Press the ENTER button to set and save
the backlight value.
Power Saving Parameters