Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 154 / 220

S e t R a t e 1 . 5 2 0 L / M
O P 6 5 . 3 % A c t 1 . 5 2 1
A m o u n t R e q . 1 2 0 . 5 0
O N A c t 1 1 8 . 3 L B
S e t R a t e 1 . 5 2 0 L / M
O P 6 5 . 3 % A c t 1 . 5 2 1
Set Point Rate Required
Chapter 8 - Operation
8-3
FIG. 8-4 RATE DISPLAY
The Rate
Section
• The Set Rate shows the required Set Point rate at 1.520 pounds per
minute.
• The current Output Signal Level shows 65.3% of the available out-
put signal driving the feeder.
• Act Rate shows the actual flow rate of 1.521 pounds per minute.
The Weight
Section
• Current Weight Display (See Fig. 8-5)
The current weight display shows that the actual weight of the
ingredient currently in the feeder or scale is: 87.566 lbs
• Total Weight Display (See Fig. 8-6)
Displays the accumulated weight total that has passed through the
feeder from a start date and time to the present date and time.
In the example display, the total amount of ingredient which has
passed through the feeder since 3:35 PM, June 16th is 1,267.987
pounds.