Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 104 / 220

Chapter 6 - Setup
6-13
Setting Up the
Controller for
Manual Tuning
Step 1. Press the Config button. The Security Message displays.
Step 2. Enter the HI security code number.
Step 3. Press the Enter button. The TUNING/CONTROL MENU
appears with the cursor to the left of Timebase (sec). (See Fig.
6-10)
T U N I N G / C O N T R O L M E N U
T i m e b a s e ( S e c ) 4
K ( I N T G. ) 2 6
K ( P R O P. ) 2 1 0
FIG. 6-10 ENTERING TIMEBASE PARAMETER
Step 4. The default setting for Timebase is 4 seconds. Press the Select
button until a new value appears. (1 min, 120 max)
Step 5. Press the Enter button to accept the new value setting.
Step 6. Press the down arrow
↓
until the cursor is next to the AVRG.
Sub-Menu. (See Fig. 6-11)