Hardy Process Solutions HI 1769-WS, Operation And Installation Manual

Page: 22 / 82

HI 1769-WS/HI 1769-2WS WEIGH SCALE MODULE
3-4
Step 3. Gently slide the HI 1769-WS or HI 1769-
2WS module onto the other module. In our
example we connected two Hardy HI
1769-WS Weigh Modules.
Step 4. When you have the modules aligned, press
Lever B towards Module A to fasten the
connector to Module A. (See Fig. 3-3)
FIG. 3-3 CONNECTOR IN LOCKED POSITION
Step 5. The installation is comple.
Installing the Module

I/O Connector
About the Module
I/O Connector
The I/O Connector at the front of the module connects
the module to the Remote Terminal Assembly (-
RTA), a load sensor, or the HI 215IT Series Junction
Box depending on how many load sensors are
installed in the weighing system. See below for the
pin-out diagram. The pin-out diagram is located on
the inside of the module door. (See Fig. 3-4)